Product Wiki · Recalls · EU Safety Gate (RAPEX)

DVD player — recall 1306/07

EU Safety Gate (RAPEX) · Finland · 2007-12-14 · Serious risk

Machine-translated with AI — the facts come from the issuing authority’s own notice (linked on this page); this language version was translated automatically by an AI model and is not reviewed. The original-language notice is authoritative. How we use AI →
Agency
EU Safety Gate (RAPEX)
Recall identifier
1306/07
Date of alert
2007-12-14
Country / jurisdiction
Finland
Risk level
Serious risk
Risk type
Electric shock
Brand
Denver
Product category
Electrical appliances and equipment
Product type
DVD player
Reported risk: Tämä tuote aiheuttaa sähköiskuvaaran, koska verkkojännitteeseen kytketyn ensiöpiirin ja kosketeltavissa olevan toisiopiirin välillä ei ole riittävää sähköeristystä. Toisiopiiri on kosketeltavissa liittimien kautta. Vuotomatkat ja ilmavälit verkkomuuntajassa ensiökäämien ja toisiokäämien välillä, ensiökäämien ja toisiokäämien lähtökäämilankojen välillä sekä toisiokäämien ja ensiökäämien lähtökäämilankojen välillä ovat alle 5 / 4 mm (mitattu vähintään 0,45 mm / 3,5 mm / 1,7 mm). Toisiopiiri on kosketeltavissa liittimien kautta. Käämit on sijoitettu
Action taken by the authority
Type of economic operator to whom the measure were ordered
Other
Category of measure
Recall from consumers ordered by the authorities
Machine translation. This page was translated automatically from the English record we hold of the issuing authority’s notice. The English original is shown below and the authority’s own notice is linked above — both take precedence over this translation.

Product Name (original English): DVD player

Risk Description (original English): This product poses a risk of electric shock due to the fact that there is not sufficient electrical insulation between the primary circuit connected to the mains and the secondary circuit that can be touched. The secondary circuit is accessible through the terminals. Creepage distances and clearances in the mains transformer between the primary windings and secondary windings, between the primary windings and the output winding wires of the secondary windings, between the secondary windings and output winding wires of the primary windings are less than 5 / 4 mm (measured a minimum 0.45 mm / 3.5 mm / 1.7 mm). The secondary circuit is accessible through the terminals. The windings are positioned concentrically on a single coil former. All output winding wires are not insulated with the insulation tubes.The product does not comply with the Low Voltage Directive.

Primary source: https://ec.europa.eu/safety-gate-alerts/screen/webReport/alertDetail/-13003

Verify each fact at the issuing agency before acting. Recall scope, affected lots, and remediation instructions may be updated by the agency after our last sync.

ProductGuru indexes recall and safety-alert records from ~30 public agency registries. We are not lawyers, regulators or product-safety consultants. This page restates what the named agency published; consult the primary source above (or qualified counsel in your jurisdiction) before any commercial, medical or safety decision.