🌐Machine-translated with AI — the facts come from the issuing authority’s own notice (linked on this page); this language version was translated automatically by an AI model and is not reviewed. The original-language notice is authoritative. How we use AI →
Reported risk: The product poses a risk of burns and electric shock for the following reasons:· The insulation is not sufficient. · The cross-sectional area of the external wires is insufficient and the wires could overheat.· The wire ends soldered to terminals of flashing switch and control unit are not adequately protected against pulling and twisting. · The accessible basic insulated wires can come into contact with sharp edges of the flashing switch and control unit. In case of damage, the live metal wires become accessible. · The dimensions of the plug are substantially less than required and during connection the user may touch the live pin of the plug. The product does not comply with the Low Voltage Directive and the relevant European standard EN 60598.
Machine translation. This page was translated automatically from the English record we hold of the issuing authority’s notice. The English original is shown below and the authority’s own notice is linked above — both take precedence over this translation.
Verify each fact at the issuing agency before acting. Recall scope, affected lots, and remediation instructions may be updated by the agency after our last sync.
ProductGuru indexes recall and safety-alert records from ~30 public agency registries. We are not lawyers, regulators or product-safety consultants. This page restates what the named agency published; consult the primary source above (or qualified counsel in your jurisdiction) before any commercial, medical or safety decision.