Rappels de Appareils et équipements électriques dans l'UE 2024-2026
Un index continuellement mis à jour de 1343 rappels graves de Appareils et équipements électriques dans l'ensemble de l'UE (2024-01-05 – 2026-11-06), compilé à partir du EU Safety Gate (RAPEX) et des autorités nationales de protection des consommateurs. Chaque entrée renvoie à l'alerte officielle des pouvoirs publics.
The plastic in the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value up to 24.8% by weight).
This phthalate poses a risk to human health and the environment.…
The insulation distance on the printed circuit board of the appliance is insufficient. The user could access live parts and receive an electric shock.…
The creepage and clearance distances of the electrical circuit of the device, its insulation and electrical strength are inadequate. Live parts may become accessible, and the user could receive an ele…
The creepage distance between the primary and secondary circuit are inadequate. Live parts of the product may become accessible to the user who can receive an electric shock.…
The solders in the product have an excessive concentration of lead and cadmium (measured value: 58.7% and 0.20% by weight, respectively).
The plastic material of the black insulation cord has an exces…
The solders in the product have an excessive concentration of lead (measured value up to 38.1% by weight).
The product has excessive concentrations of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phtha…
The solders in the product have an excessive concentration of lead and cadmium (measured values: up to 55.5% and 0.252% by weight, respectively).
The plastic in the USB cord has excessive concentratio…
The product's insulation and the creepage distance between the primary circuit and the secondary circuit are insufficient. The user could therefore have access to live parts and receive an electric sh…
The insulation between the circuits does not withstand the voltage and is not reinforced. Moreover, the spacing between the circuits on the printed circuit board is too small. Additionally, the transf…
The creepage and clearance distances between the primary and secondary side in the “safety extra low voltage” (SELV) transformer of the product are inadequate. Live parts of the product may become acc…
The product lacks adequate insulation between the primary and secondary circuits. The USB ports and the connected cable can become live under mains voltage. Consequently, the user may receive an elect…
The product lacks adequate insulation between the primary and secondary circuits. The USB ports and the connected cable can become live under mains voltage. Consequently, the user may receive an elect…
The product lacks adequate insulation between the primary and secondary circuits. The USB ports and the connected cable can become live under mains voltage. Consequently, the user may receive an elect…
The product lacks adequate insulation between the primary and secondary circuits. The USB ports and the connected cable can become live under mains voltage. Consequently, the user may receive an elect…
The product lacks adequate insulation between the primary and secondary circuits. The USB ports and the connected cable can become live under mains voltage. Consequently, the user may receive an elect…
The separation between the live parts on the primary side and the safety extra-low voltage (SELV) secondary side is insufficient. If the single capacitor providing isolation fails, high voltage could …
The solders in the product have an excessive concentration of lead (measured value: up to 62.1% by weight).The plastic material of the USB cable has an excessive concentration of bis(2-ethylhexyl) pht…
The solders of the circuit board in the product have an excessive concentration of lead (measured value: 84% by weight). Lead poses a risk to the environment. The plastic parts of the product have an …
The solders in the product have an excessive concentration of lead and cadmium (measured values up to 72% and 0.24% respectively). Lead poses a risk to the environment. Cadmium bio-accumulates and pos…
The solders in the product have an excessive concentration of lead (measured value up to 73.8 % by weight).Lead poses a risk to the environment. The product does not comply with the requirements of th…
The plastic material of the cable has excessive concentrations of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), short chain chlorinated paraffins (SCCPs) and lead (measured values up to…
The plastic material of the cable has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP) and short chain chlorinated paraffins (SCCPs).DEHP and DBP pose a risk t…
The plastic material of the cable has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP) and short chain chlorinated paraffines ( SCCPs) (measured values up to 1…
The plastic material of the cable has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) and short-chain chlorinated paraffins (SCCPs) (measured values up to …
The plastic material of the cable has excessive concentrations of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP) and short chain chlorinated paraffins (SCCPs) Solders in the product conta…
The solders in the product have an excessive concentration of lead (measured value up to 52.8% by weight). The plastic material of the cable has excessive concentrations of bis(2-ethylhexyl) phthalate…
The solders in the product have an excessive concentration of lead (measured value up to 60.2% by weight).Lead poses a risk to the environment. The product does not comply with the requirements of the…
The solders in the product have an excessive concentration of lead (measured value up to 5.68 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of t…
The product lacks adequate insulation, which may cause metal parts to become insufficiently protected. As a result, the user could touch accessible live parts and receive an electric shock. The produc…
The solders in the product have an excessive amount of lead (measured value 0,15% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive o…
The solder in the product has an excessive concentration of lead (measured value up to 0.98% by weight).Lead poses a risk to the environment. The product does not comply with the requirements of the D…
The product lacks adequate insulation between the primary and secondary circuits. The secondary USB ports and the connected cable can become live under mains voltage. Consequently, the user may receiv…
The solders in the product have excessive concentrations of lead and cadmium (measured values up to 51.7% and 0.0875% by weight, respectively).Cadmium bio-accumulates and poses a risk to the environme…
The plastic material of the cord has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP) and short chain chlorinated paraffins (SCCPs) (measured values up to 4.07…
The plastic material of the cable has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value up to 0.85%).The solders in the product have an excessive concentration of lead (…
The solders in the product have an excessive concentration of lead and cadmium (measured values up to 50% and 0.14% by weight, respectively).The plastic material of the cable has an excessive concentr…
The solders in the product have an excessive concentration of lead (measured value up to 77.9% by weight).The plastic material of the cord has an excessive concentration of bis(2-ethylhexyl) phthalate…
The solders in the product have an excessive concentration of lead and cadmium (measured values up to 80.5% and 0.231% by weight, respectively).The plastic material of the cable has an excessive conce…
2026-10-23 · United Kingdom in respect of Northern Ireland · Serious risk · official alert
The plug face does not meet dimensional requirements, and the supplied fuse is considered counterfeit and lacks the required ballast. As a result, the product may not be adequately protected under fau…
The live parts of the lamp cap are accessible when the lamp is partially screwed into the lampholder of the luminaire, leading to electric shock. Consequently, the user could touch accessible live par…
The solders in the product have an excessive concentration of lead (measured value up to 54% by weight).Lead poses a risk to the environment. The product does not comply with the requirements of the D…
The plastic material of the cable has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP) and short chain chlorinated paraffins (SCCPs) (measured values: 8.7%, 0.…
The solders in the product have an excessive concentration of lead (measured value up to 36.9% by weight).Lead poses a risk to the environment. The product does not comply with the requirements of the…
2026-10-16 · United Kingdom in respect of Northern Ireland · Serious risk · official alert
The earthing conductor is shorter than the current-carrying conductors. If the supply cord slips out of its anchorage, the earthing connection could therefore disconnect first, while the live conducto…
The solders in the product have an excessive concentrations of lead and cadmium (measured values up to 38.8% and 0.12% by weight, respectively). The plastic material of the cable has an excessive conc…
The solders in the product have excessive concentrations of lead and cadmium (measured values up to 70% and 0.125% by weight, respectively). The plastic material of the cable has an excessive concentr…
The solders in the product have excessive concentrations of lead and cadmium (measured values: up to 72.7% and 0.1% by weight, respectively). The plastic material of the cable has excessive concentrat…
The solders in the product have an excessive concentration of lead and cadmium (measured values up to 82.9% and 0.41% by weight, respectively).Cadmium bio-accumulates and poses a risk to the environme…
2026-10-16 · United Kingdom in respect of Northern Ireland · Serious risk · official alert
The product has poor quality internal connections and internal wires which are all the same length. This could lead to the product losing protective earthing and becoming live during use, presenting a…
The earthing conductor is shorter than the current-carrying conductors. If the supply cord slips out of its anchorage, the earthing connection could therefore disconnect first, while the live conducto…
The solders in the product have an excessive concentration of lead (measured value: up to 67.4% by weight). The plastic material of the cable has an excessive concentration of bis(2-ethylhexyl) phthal…
The windings in the transformer are not properly fixed or insulated and are too close to the metal parts. Additionally, the safety distances on the printed circuit board are too small and the distance…
The solders in the product have an excessive concentration of lead (measured value: up to 31.3% by weight). Lead poses a risk to the environment.The plastic material of the cable has excessive concent…
The solders in the product have an excessive concentration of lead and cadmium (measured value: up to 57.6% and 0.385% by weight, respectively). Lead poses a risk to the environment.Cadmium bio-accumu…
The clearance and the creepage distance between the live parts of the product is inadequate, which creates a risk of electric shock and fire. The product does not comply with the requirements of the L…
The product's insulation and distances between the circuits are insufficient. The user could access live parts and receive an electric shock. The product does not comply with the requirements of the L…
Due to incorrect design of the product, live parts (such as the heating spring) can be easily accessed through the air outlet of the appliance. Moreover, the user could receive an electric shock. The …
The solders in the product have an excessive concentration of lead (measured value up to 78.5 % by weight). The plastic material of the cable has an excessive concentration of bis(2-ethylhexyl) phthal…
The creepage and clearance distances between power and welding circuits are inadequate. Moreover, the electrical strength of the device is inadequate. Live parts of the device may become accessible to…
Méthodologie et sources. Agrégé à partir des registres de rappels officiels européens et nationaux (principalement le Safety Gate de l'UE / RAPEX) et reflétant la classification propre à chaque autorité. ProductGuru est un service d'information indépendant, et non un organisme public, et ne fournit aucun conseil médical, juridique ou financier — consultez toujours la source officielle. Rappels de biens de consommation présentant un risque grave à partir de 2024. Libre de citation avec attribution.